The Original Cannonball long reach hammer is a high quality innovative system for hammering nails into hard to reach places.
The Original Cannonball Hammer is suitable for most round headed nails upto 75mm.
This is an ideal tool for roofers, carpenters, builders and the handyman. It is particularly useful in confined spaces where swinging a conventional hammer is not possible.
1 Simply insert a nail into the end of the barrel or remove the ram rod and drop the nail into the Cannonball. 2 Position the barrel to the desired location. 3 Then draw back the Cannonball hammer head and drive forward, repeat until the nail is hammered home. It’s that simple. 4 With practice The Original Cannonball Hammer will drive nails at almost any angle into just about anywhere.

A hammer must never be used on the Original Cannonball Hammer this will result in tool damage and possible injury. Not suitable for masonry nails or riveting applications All tools are dangerous so caution must be exercised when using this hammer, to avoid serious injury full protective clothing must be worn i.e. Gloves etc. To maintain your Original Cannonball Hammer a coat of light machine oil should be applied regularly.
The strike face of the ramrod may, with repeated use develop a mushroom effect which can be easily removed with a light filing.

Hammer a groundhog

We do not recommend that a hammer is used on the cannonball head.
Suitable for most round headed nails up to 75mm.
Not suitable for hammering masonry nails or riveting applications
All tools are dangerous so caution must be exercised when using this hammer and full protective clothing must be worn i.e. Gloves, etc
To maintain your Original Cannonball hammer a coat of light machine oil should be applied regularly
The strike face of the ramrod with repeated use will develop a mushroom effect which can be removed with a light filing
Patent pending. design registered and copyrighted
terms and conditions